Digital Acoustics EDB-110 Manuel télécharger pdf (Page 7)

- 7 -

Assign IP address as Static or use DHCP

Select DHCP mode to allow your network server to

automatically assign the IP address, subnet, and gateway to

the intercom. Your system MUST have DHCP assignment

capability if you choose use this option. If you are unsure, do

NOT use DHCP.

After assigning DHCP, press APPLY. The results on the board

list will show the selected IP address, Subnet mask, and

Gateway that were acquired from the DHCP server

Setting the Intercom Alias "Friendly Name"

Location Name: Set a recognizable text name to

reference a specific Intercom

Choose the Intercoms Server IP address

A client intercom will always attempt to connect to the Server

IP when it is first turned on. This IP address must be assigned

by the Intercom Configuration Utility. It can be assigned

manually or automatically.

Assign this PC address as client's server

When checked, the Server IP text box will be automatically

set with the IP address of the PC running TalkMaster. This will

instruct the intercom to search for the PC running TalkMaster.

When unchecked, the Server IP box may be manually

assigned.

Server IP IP address of the Server

Server Port Port for use in connections (default is 3000)

Saving your configuration

Apply Save settings to selected intercom

Cancel Cancel settings before saving

Exit Close the Configuration Utility Screen

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Pas de commentaire

Digital Acoustics EDB-110 Manuel Page 7